13
edits
Changes
Jump to navigation
Jump to search
→Power adapter voltage modification (110V to 220V)
# Open the case and get the main PCB out.
# Desolder this resistor on the component side, marked in the blue circlein the 1st image below.# Desolder components marked R153 and C154 on the back side, marked in the red squarein the 2nd and 3rd image below .# Either cut open this connection on the back side marked by the yellow linein the 4th image below, or desolder the component marked in the red boxin the 5th image below.
# Reinstall the main PCB and reassemble the case.
<gallery>
