988
edits
Changes
Jump to navigation
Jump to search
m
→Step 1 - Remove the disc drive
To work on the CD drive, you will need to remove it from the console. Follow [[Panasonic 3DO FZ-10 Teardown|this guide]] through step 6 to open the FZ-10 and remove the drive. Put the rest of the console aside and focus your attention on the drive.
Five cables extends extend from the CD drive: 3 ribbon cables and two wire pairs. Two of the ribbon cable are connected to the laser, and the other is connected to the spindle motor. The orange and brown wire pair controls the motor which controls the laser's position, and the blue and brown wire pair controls a switch which lets the drive know if the laser has reached the spindle.
==Step 2 - Remove the laser sled motor==
