Changes

Jump to navigation Jump to search

Sega Saturn Teardown

217 bytes added, 23:25, 4 January 2014
m
22 revisions
[[File:Saturn-teardown10.jpg|thumb]]
The two screws indicated by the red arrows secure only the controller board. The motherboard can be freely lifted from the case. Once the screws are removed, the controller board can also be taken out of the case without effort. If you need to access the controller board, you can just slide the RF shield off.
 
 
 
 
==Step 8 - Remove the bottom RF shield==
==Tips for Reassembly==
Just follow the previous steps in reverse order to put everything back together. Some tips:
 
*Remember that the RF shield screws near the cartridge slot are longer than the rest
*Don't forget the plastic protector that goes between the RF shield and the power board. Also, reattach the power switch first because its wire runs underneath the plastic protector (see step 3).
*Use the picture in step 4 to correctly orient the ribbon cable that connects the CD drive to the motherboard
*Use step 5 to identify the screwhole when reconnecting the grounding strip to the CD drive. Don't forget that the screw has a washer!

Navigation menu