Dreamcast Teardown

From Game Tech Wiki
Revision as of 02:40, 3 March 2014 by ITEM-3 (talk | contribs) (Step 2)
Jump to navigation Jump to search
This is a guide for disassembling a Sega Dreamcast. Click on any of the images for a larger version.

You will need the following tools:

  • A Phillips-head screwdriver
  • A small pair of pliers (helpful but not required)
Dreamcast teardown 01.jpg

Open the case

The Dreamcast's shell is held together by 4 screws, one on each corner. One is hidden by the modem, so remove that if you haven't done so already. Flip the console over, and lift the top off.
Dreamcast teardown 02.jpg

Detach the power board

Unplug the power switch from the power board and remove the two screws shown in the picture. The power board connects to the motherboard through a 6-pin port on the end closest to the controller ports. Grip the board at this corner and gently pull it up and off the pins, which are physically part of the motherboard. The pins are firmly attached and require you to use some force to free the board.
Dreamcast teardown 03.jpg

Step 3

Dreamcast teardown 04.jpg