Difference between revisions of "ColecoVision Teardown"
Jump to navigation
Jump to search
m (starting to write the guide) |
m |
||
Line 7: | Line 7: | ||
==Step 1 - Remove bottom screws== | ==Step 1 - Remove bottom screws== | ||
− | Flip the console over and remove the | + | [[File:Colecovision-teardown02.jpg|thumb|150px]] |
+ | Flip the console over and remove the 8 screws from the bottom. Note: my ColecoVision only had 6 screws on the bottom, but there are 8 screwholes so I assume I was missing a couple screws. |
Revision as of 19:13, 23 July 2013
This is a stub.
This is a guide for completely dismantling a ColecoVision to gain access to the motherboard and to be able to clean the inside of the case. Opening the console is fairly straightforward with the only complication being removing the top of the case.
Tool needed:
- A large Phillips-head screwdriver
Step 1 - Remove bottom screws
Flip the console over and remove the 8 screws from the bottom. Note: my ColecoVision only had 6 screws on the bottom, but there are 8 screwholes so I assume I was missing a couple screws.