Difference between revisions of "Atari 7800 Teardown"

From Game Tech Wiki
Jump to navigation Jump to search
Line 9: Line 9:
  
 
==Step 1 - Open the case==
 
==Step 1 - Open the case==
Flip the console over and remove the 5 screws on the bottom. Turn it back over and lift the top off. The top should come off effortlessly.
+
{|
 
+
|Flip the console over and remove the 5 screws on the bottom, which are circled in the picture. Turn it back over and lift the top off. The top should come off effortlessly.
 +
|[[File:Atari_7800_teardown02.jpg|200px|right]]
 +
|-
 +
|Here is the underside of the top of the case. The buttons can be removed easily by pushing the small plastic tabs inward and down.
 +
|[[File:Atari_7800_teardown13.jpg|200px|right]]
 +
|}
 
==Step 2 - Remove the motherboard from the case==
 
==Step 2 - Remove the motherboard from the case==
  

Revision as of 00:23, 24 January 2014

Atari 7800 teardown01.jpg

This is a guide for completely disassembling an Atari 7800.

You will need the following tools:

  • A large Phillips-head screwdriver
  • A small pair of pliers
  • A small, sturdy (i.e. difficult to bend) flathead screwdriver for bending hard-to-reach metal tabs

Step 1 - Open the case

Flip the console over and remove the 5 screws on the bottom, which are circled in the picture. Turn it back over and lift the top off. The top should come off effortlessly.
Atari 7800 teardown02.jpg
Here is the underside of the top of the case. The buttons can be removed easily by pushing the small plastic tabs inward and down.
Atari 7800 teardown13.jpg

Step 2 - Remove the motherboard from the case

Step 3 - Remove RF shield

Fully exposing the motherboard can be somewhat time consuming. The board is partially encased by an RF shield consisting of top and bottom halves that interlock using several metal tabs, which are bent to prevent the halves from detaching. There are 14 metal tabs, and you'll have to straighten each one to remove the shield.