Difference between revisions of "Video Signals"
Jump to navigation
Jump to search
m (→S-video) |
(add composite info) |
||
Line 22: | Line 22: | ||
==Composite== | ==Composite== | ||
− | Composite combines the chroma and luma signals of s-video into a single signal. | + | [[File:Composite-video-cable.jpg|thumb|Yellow RCA cable]] |
+ | Composite video combines the chroma and luma signals of s-video into a single signal. It is transmitted using an RCA cable, usually with a yellow connector, and is often grouped with red and white audio RCA cables. The inner pin carries the video signal, and the outer ring is ground. | ||
==RF== | ==RF== |
Revision as of 03:34, 5 June 2013
Contents
RGB
HDMI
Component
S-video
S-video splits the video signal into two pieces: chroma (color) and luma (brightness). Chroma and luma are sometimes abbreviated by the letters C and Y, respectively.
Pin Assignments | |
---|---|
Pin 1 | Ground (Luma) |
Pin 2 | Ground (Chroma) |
Pin 3 | Luma |
Pin 4 | Chroma |
Composite
Composite video combines the chroma and luma signals of s-video into a single signal. It is transmitted using an RCA cable, usually with a yellow connector, and is often grouped with red and white audio RCA cables. The inner pin carries the video signal, and the outer ring is ground.